Description
Self-drying shampoo Perloban® / Autodry Shampoo
For hulls and decks
For use on: gelcoat, painted surfaces, windows, stainless steel etc.
Active, self-drying shampoo for all small-craft surfaces: gelcoat, glass, stainless steel, acrylic, plastic, wood etc. No need to dry with a cloth after rinsing; based on plant-derived surfactants. Contains no phosphates, chlorine or nitrilotriacetic acid (NTA). Note: the product does not make surfaces that have had a hydrophobic treatment (polishing) hydrophilic.
HOW TO USE: dilute 50–150 ml of product in 5–10 litres of water. Apply, scrub with a brush, rinse with clean water from top to bottom without pressure and leave to dry. CAUTION: do not use a pressure washer. Do not use undiluted. Do not swallow.
SAFETY INFORMATION:
Causes skin irritation.
Causes serious eye irritation.
Contains 2-methyl-2H-isothiazol-3-one. May produce an allergic reaction.
Composition: <5% (phosphonates, non-ionic surfactants, amphoteric surfactants), perfumes, preservatives (benzisothiazolinone, methylisothiazolinone).
If medical advice is needed, have the product container or label at hand. Keep out of reach of children.
Wash hands thoroughly after handling.
Wear protective gloves/eye protection/face protection.
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
If eye irritation persists: get medical advice.
UFI code: W9C8-20G3-H002-JPJC